Mechanical and Electrical Equipment for Buildings, 10th Edition

Book Description

Continuing its proud heritage, this Tenth Edition provides thorough coverage of the latest in the theory and practice of environmental control system design. This bestselling book encompasses mechanical and electrical systems for buildings of all sizes, featuring design guidelines and detailed design procedures for every topic covered and supported by more than 2,200 illustrations—over 225 new to this edition!

Customer Reviews:

Informative.......2007-04-08

This book was used as a text for two of my classes in my third year of architecture schooling. It is extremely useful, with lots of descriptions and helps you to understand more than just the structure of the building. Lighting, plumbing, all the different systems, etc. It has been very useful and I recommend it as a great reference.

Very very very thick - but truly worth owning !.......2007-01-31

I came across this book preparing Architectural Registration Exam (ARE).
I have to say that this book is an essential for architects
who are preparing MEP (Mechanical/Electrical/Plumbing)section of the ARE.

The book is divided into basically nine sections.

1. design context
2. thermal comfort
3. illumination
4. acoustics
5. water/waste
6. fire protection
7. electricity
8. signal equipment
9. transportation

It describes various systems of each section with pretty
accessible narrative.
Abundance in graphics and diagrams is very helpful.
The book is extremely helpful in understanding where each
kit of parts fit into the overall building systems.

For instance, I heard about AHUs/ cooling towers/ refrigeration
cycle/ boilers/ duct systems/ etc. , but I never knew how
they fit and interconnect to one and another. The book, being
encyclopedic in its contents, really helps to overcome that.

The book also pays particular attention to the "sustainable"
agendas and strategies.

Mechanical and Electrical Systems/ Buildings.......2007-01-04

I was searching for a good general description of central plants. The impending installation of 1000 ton chillers, cooling towers, electrical conversion to primary service, multiple emergency generators, paralleling gear, etc. This book didn't fit the bill. The 9 pages on central plants for HVAC were a disappointment. From the title , I expected more on MEP and didn't expect the book to be more about illumination, color,acoustics etc. My fault, not the book.

Weighty tome shows how engineering intersects architecture.......2006-07-16

This almost 1800 page treatise on mechanical and electrical design as it relates to architecture is one of a kind. It is not an artistic book on the subject, although some artistic ability is always needed in any aspect of building design. Instead it is a very technical book that shows how the architect must be part electrical engineer, mechanical engineer, electrician, physicist, plumber, safety specialist, and transportation engineer in order to design the modern building. And to top it all off, you need to be knowledgable of current mechanical and electrical equipment - their specifications and their costs.

The book has plenty of examples with step by step instructions on how to perform various subtasks. Many of these examples contain numerical calculations, so it will help if you have had freshman engineering physics, especially in the sections on illumination, acoustics, and electricity where calculations, tables, and equations abound.

The book is broken into nine parts encompassing nearly every technical decision involved in designing a modern building. The first section is an introductory one on the context of design. That is followed by sections on thermal control, illumination, acoustics, water and waste, fire protection, electricity, signal systems, and finally in-building transportation. A lengthy appendix contains a great deal of supplemental information, including climate data for various parts of the United States, solar geometry, sound transmission data, and a listing of software that can be helpful in performing the tasks discussed in this book, and how that software can be obtained.

I highly recommend this book to aspiring architects and also to civil engineers that are interested in the construction of modern buildings. It's been the flagship book on the subject for seventy years in its various editions, and probably will continue to be so for the foreseeable future.

Mechanical and Electrical Equipment for Buildings.......2006-07-04

Excellent. The best book I have seen on the subject.

Mechanical and Electrical Equipment for Buildings, 9th Edition

Average customer rating:

Must Have
MEEB Bow Down
review of Mechanical and Electrical Equipment for Buildings, 9th Edition by Ben Stein
Best One-Volume Resource For Engineers
An author's view:

Mechanical and Electrical Equipment for Buildings, 9th Edition
Ben Stein , and John S. Reynolds
Manufacturer: Wiley
ProductGroup: Book
Binding: Hardcover

General | Architecture | Professional & Technical | Subjects | Books

Construction | Architecture | New & Used Textbooks | Stores | Books

General | Architecture | New & Used Textbooks | Stores | Books

Electrical & Electronics | Engineering | New & Used Textbooks | Stores | Books

Mechanical | Engineering | New & Used Textbooks | Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books
Similar Items:

ASIN: 0471156965

Book Description

The definitive guide to the design of environmental control systems.

For more than half a century, this book has been a fixture in architecture and construction firms the world over. It has also been the primary means by which generations of students have acquired the basic knowledge and skills needed to design environmental control systems. Twice awarded the AIA's Citation for Excellence in International Architecture Book Publishing, Mechanical and Electrical Equipment for Buildings is recognized for its comprehensiveness, clarity of presentation, and timely coverage of new design trends and technologies.

Faithful to its proud heritage, this Ninth Edition provides students and professionals with the most complete coverage of the theory and practice of environmental control system design currently available. Encompassing mechanical and electrical systems for buildings of all sizes, it provides design guidelines and detailed design procedures for each topic covered. It also includes information on the latest technologies, new and emerging design trends, and relevant codes and zoning restrictions-and its more than 1,500 superb illustrations, tables, and high-quality photographs provide a quick reference for both students and busy professionals.

Emphasizing sustainability in architecture throughout, this new edition includes expanded coverage of energy conservation and renewable on-site energy resources. It also features a new chapter on interior air quality, expanded coverage of building acoustics, and many new and updated tables and illustrations.

Customer Reviews:

Must Have.......2007-09-14

used as a textbook, but even if not would make an excellent companion to any elec mech class.

MEEB Bow Down.......2005-09-14

If you want to know more than most Architects and Engineers about how to design the guts of buildings this is the book to use. It's a fat guy though! Sometimes the text seems to weigh you down. Most architectural students consider it a sloug! But, once they graduate, they use it throughout their careers as design professionals. If you want to know how to develop a regional climatic response strategy for your building or development, calculate passive ventillation rates or heat gains and losses on unique configurations of wood, siding and insulation; size gutters or a rain water catchment system or plan for an elevator, this is the book for you.

review of Mechanical and Electrical Equipment for Buildings, 9th Edition by Ben Stein.......2005-08-29

This is the best reference for Architects and students studying mech. & elec. equipment

Best One-Volume Resource For Engineers.......2005-02-05

If you are an engineer engaged in the design of mechanical and electrical systems for commercial and institutional buildings, you may find this your most valuable reference for an overview of theory and best practices for the entire gamut of building systems.

I did find a bit too much enthusiasm for environmentally friendly and energy-conserving new ideas. Many of these technologies are worth following but have economic results that will not serve your clients well.

I am a professional engineer (leading my own firm) with 40 years of experience and have a huge library including the eighth and ninth editions of this book; it's one of my favorites.

It's must reading for a new engineer because you will be able to understand the basics of areas that are new to you with an hour or two of study.

An author's view:.......2002-01-26

My part of this book (mechanical and plumbing) is designed to first show how to minimize the need for mechanical equipment by designing with the climate and site firmly in mind. First configure a building to optimize daylighting, solar heating, and various climate-appropriate passive cooling methods. Also, to store rainwater when appropriate. Then, proceed to choose and size the back-up equipment. In this way, designers conserve non-renewable energy, utilize natural (on-site) energy sources, and also help building occupants stay in touch with the outdoors. I believe that we'll tend to care more about a clean outdoor environment if we are kept aware of its condition.
For a summary of this approach, read Chapter One. I hope you enjoy this book, even when it is your textbook! That was my object. Suggestions? I'm at jreyn@darkwing.uoregon.edu

Building Technology: Mechanical and Electrical Systems, 2nd Edition

Average customer rating:

My Grandpa's Grandest book!

Building Technology: Mechanical and Electrical Systems, 2nd Edition
Ben Stein
Manufacturer: Wiley
ProductGroup: Book
Binding: Hardcover

General | Architecture | Professional & Technical | Subjects | Books

General | Arts & Photography | Subjects | Books

Electrical & Electronics | Engineering | New & Used Textbooks | Stores | Books

Mechanical | Engineering | New & Used Textbooks | Stores | Books

All Amazon Upgrade | Amazon Upgrade | Stores | Books

Arts & Photography | Amazon Upgrade | Stores | Books

Computers & Internet | Amazon Upgrade | Stores | Books

Engineering | Amazon Upgrade | Stores | Books

Professional & Technical | Amazon Upgrade | Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Arts & Photography | Qualifying Textbooks - Fall 2007 | Stores | Books

Computers & Internet | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books
Similar Items:

ASIN: 0471593192

Book Description

The complete guide to building technology

This comprehensive guide provides complete coverage of every aspect of the building technologist's profession. It details design and installation procedures, describes all relevant equipment and hardware, and illustrates the preparation of working drawings and construction details that meet project specifications, code requirements, and industry standards. The author establishes procedures for professional field inspections and equipment operations tests, provides real-world examples from both residential and nonresidential construction projects, and makes specific references to code compliance throughout the text.

This new edition incorporates changes in building codes, advances in materials and design techniques, and the emergence of computer-aided design (CAD), while retaining the logical structure and helpful special features of the first edition. More than 1,100 drawings, tables, and photographs complement and illustrate discussions in the text. Topics covered include:
* Heating, ventilating, and air conditioning systems- equipment and design
* Plumbing systems- equipment and design
* Electrical and lighting systems- equipment and design
* Testing, adjusting, and balancing procedures for all building systems
* Every aspect of the building technologist's profession, from the creation of working drawings through on-site supervision and systems maintenance

Extensive appendices include conversion factors; duct design data; test report forms for use in field work; design forms and schedules for electrical, HVAC, and plumbing work; and more.

Customer Reviews:

My Grandpa's Grandest book!.......2001-03-05

A Great book on the fundamentals of engineering. It is used in many colleges. It helped me a lot for my most recent science fair project.

Average customer rating:

An excellent book crammed with information
Bad

Building Control Systems
Vaughn Bradshaw
Manufacturer: Wiley
ProductGroup: Book
Binding: Hardcover

Buildings & Construction | Home Design | Home & Garden | Subjects | Books

Plumbing & Household Automation | How-to & Home Improvements | Home & Garden | Subjects | Books

General | Engineering | Professional & Technical | Subjects | Books

General | Science | Subjects | Books

General | Arts & Photography | Subjects | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Arts & Photography | Qualifying Textbooks - Fall 2007 | Stores | Books

Home & Garden | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books

Science | Qualifying Textbooks - Fall 2007 | Stores | Books
Similar Items:

ASIN: 0471573787

Book Description

Architects were once charged with designing entire buildings, including the HVAC, lighting and power systems. But with the advent of more complex technologies, engineers and other specialists became responsible for these systems, with architects assuming expanded roles as team managers. The latest edition of Building Control Systems provides architecture students with the larger picture without overwhelming them with details. In emphasizing a conceptual understanding of the functions of various systems and how they interact with building components, the book provides the exact information that tomorrow's architects will need to effectively communicate and coordinate with consultants in all of the many building disciplines. This revised Second Edition covers the theoretical bases for thermal control…the systems used to control the thermal environment within buildings…various electrical systems, including power and lighting…such building control topics as plumbing services and fire protection…and economics-based design decision making. Building Control Systems, Second Edition provides coverage of:

New building designs that minimize our dependence on nonrenewable fuels and use only a "fair share" of renewable fuels with important steps toward cutting costs and preserving precious resources
Such pressing environmental concerns as indoor air quality, "sick building syndrome," noise pollution, global warming, and depletion of the ozone layer and the impact on building design
New technologies, including new passive thermal control systems designed to minimize energy consumption
The latest building codes for architects and specialists on the design team

Thoroughly up to date, this book provides architecture students with theoretical information they must have as they assume the dual roles of designer and manager. This guide will also prove to be a useful on-the-job tool for architects, designers, builders, developers, contractors, beginning HVAC designers, and building managers.

Customer Reviews:

An excellent book crammed with information.......2006-11-11

Mr Bradshaw does an excellent job in presenting an enormous amount of information in a very clear manner. It is an overview, yet it gives very detailed information. It is aimed at architectural students, which I am not, but I needed information and this has helped me enormously.

Bad.......2002-02-15

I really needed this book and after I ordered it I thought great. Then days later I got an email saying They didnt have it so I was being credited. If you dont have the book DONT POST IT!!

Integrated M/E Design: Building systems engineering

Average customer rating:

Integrated M/E Design: Building systems engineering
Anil Ahuja
Manufacturer: Springer
ProductGroup: Book
Binding: Hardcover

Plumbing & Household Automation | How-to & Home Improvements | Home & Garden | Subjects | Books

General | Engineering | Professional & Technical | Subjects | Books

General | Science | Subjects | Books

Look Inside Home & Garden Books | Trip | Specialty Stores | Books

Look Inside Science Books | Trip | Specialty Stores | Books

All Amazon Upgrade | Amazon Upgrade | Stores | Books

Engineering | Amazon Upgrade | Stores | Books

Home & Garden | Amazon Upgrade | Stores | Books

Professional & Technical | Amazon Upgrade | Stores | Books

Science | Amazon Upgrade | Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books
ASIN: 0412098318

Book Description

Taking a multidisciplinary approach, this long-needed, single-source reference, provides a wealth of knowledge, ranging from the basics of building systems to explanations of why systems need to be integrated, and how integration provides a basis for increased reliability and economic growth. The book delves further, exploring environmentally responsible design through the integration of natural site resources with building systems and the impact of modern technology on buildings. Integrated M/E Design examines a wide range of issues at the core of the electronically operated, economically constrained, politically controlled, and environmentally responsible, contemporary business environment.

Average customer rating:

Great HVAC Rule of Thumbs!!!
Real Truth
Great Resource...
unorganized but occasionally useful
I made the wrong decision

HVAC Equations, Data and Rules of Thumb
Arthur A. Bell
Manufacturer: McGraw-Hill Professional
ProductGroup: Book
Binding: Paperback

General | Science | Subjects | Books

Electrical & Electronics | Engineering | New & Used Textbooks | Stores | Books

Mechanical | Engineering | New & Used Textbooks | Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books

Reference | Qualifying Textbooks - Fall 2007 | Stores | Books

Science | Qualifying Textbooks - Fall 2007 | Stores | Books
Similar Items:

ASIN: 0071361294

Book Description

HVAC answers at your fingertips! Grab this book...it's filled with valuable equations that most HVAC personnel use on a daily basis.
-- Bob Rosaler, author, bestselling HVAC Handbook.

It's very easy to find all those minute details that often mean the difference between an average design and an excellent one.
-- David Meredith, Chairman, Building Environmental Systems Technology, Penn State University.

The most complete, most job-critical reference for the most frequently used HVAC design data describes HVAC Equations, Data, Rules of Thumb. Veteran HVAC designer Arthur Bell Jr.'s handy, superbly organized data bank follows the CSI MasterFormat.

You'll reach for this time-saving task-simplifier dozens of times every working day for: Equations - more than 216 equations for everything from ductwork to air change rates...from steel pipe, relief valve and water heater sizing to NPSH calculations, Data definitions, ASME and ASHRAE code specs, air and waterproperties, conversion factors, building construction business fundamentals, equipment manufacturers, energy conservation conditions, auxiliary equipment, designer's checklists, professional societies and organizations, and more. 358 Rules of Thumb in all for buildings of every imaginable type, from churches to cocktail lounges. Includes cooling and heating loads, infiltration, ventilation, humidification, people/occupancy, lighting,appliance/equipment, more.

Customer Reviews:

Great HVAC Rule of Thumbs!!!.......2007-01-12

This book is filled with alot of information that will come in handy for an entry level HVAC designer because it contains all sorts of fundamental equations as well as rules of thumbs that the industry uses. It's also great when you're not sure of something and it's there for a quick look up. The book is nicely laid out for convience.

Real Truth.......2006-07-11

In my opinion it's a good book for aquiring knowledge about the Design, Common Systems, codes.... For students as well as for designers also it's helpful for adopting the systems and requirements in the fast growing world.

Great Resource..........2005-07-25

I am a recent grad and working in a engineering firm where I am constantly looking for rules of thumb, helpful design guidelines, and data pertaining to my projects. This book offers a wealth of hvac information that is organized and extremely valuable for entry hvac engineers.

unorganized but occasionally useful.......2005-03-04

This book did not live up to my expectations, yet over the years I have used it on occasion. Typically, for conversions, steam tables, general rules of thumb. If you have studied for the PE exam, you probably have most of what this book has to offer.

I made the wrong decision.......2004-01-23

I was very disappointed to get this book.
I've gone through it and found it is a book of waste money and time. It is hard for me to get this book returned to get my money back because I am in Australia but I'll try.
If you like HVAC, go try other books, not this one.

Mechanical and Electrical Systems in Buildings (3rd Edition)

Average customer rating:

Mechanical and Electrical Systems in Buildings (3rd Edition)
Mechanical and Electrical Systems in Buildings, 2nd
Great book for newbies!

Mechanical and Electrical Systems in Buildings (3rd Edition)
William K. Y. Tao , and Richard R. Janis
Manufacturer: Prentice Hall
ProductGroup: Book
Binding: Hardcover

Plumbing & Household Automation | How-to & Home Improvements | Home & Garden | Subjects | Books

General | Engineering | Professional & Technical | Subjects | Books

General | Science | Subjects | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Home & Garden | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books

Science | Qualifying Textbooks - Fall 2007 | Stores | Books
Similar Items:

ASIN: 0130341533

Book Description

Designed to bridge the ever-widening gap between the realities that confront engineering and construction professionals, this book provides an overview of the principles and applications of all basic mechanical and electrical systems–with a focus on what, why, and basic design data examples. The book places emphasis on the operating principles of equipment and systems–rather than on construction details, identifying systems and providing readers with an explanation of principles. Topics incorporate new developments in all the major disciplines, and reinforces the relationship of mechanical and electrical systems design in the overall context of the built environment. Includes some key topics such as Sustainable Design, Noise and Vibrations in M/E systems, the latest communications and illumination engineering technologies, Building heating, air conditioning, electrical, illumination, plumbing, and fire protection systems, Valuable data for space planning, cost, and environmental impact of building M/E systems. For design professionals involved in the development, construction, and management of commercial, industrial, and institutional buildings.

Customer Reviews:

Mechanical and Electrical Systems in Buildings (3rd Edition).......2007-02-15

This book is terrible. If you are a certified HVAC specialist, it is for you. However, if you are new to this then it is a total waste of money. Explanation is bad, example are nowhere relate to the section discussed. And worst of all, there is no answer keys. You will not have a clue if you are correct or not. Every chapter there are as least half of the review question are calculations, yet in each chapter there will be probably one page showing how calculation is done. Example one of the simplest thing:
COP = Cooling Effect / Power Input. If you look up the index, you cannot find the word "cooling effect", find out whichever chapter they discuss, or show you how to calculate the "cooling effect".
You are in luck if you do not have class that uses this book. You have bad luck if you have a "good" teacher that using this book. You are doom if you have a "bad" teacher who using this book, might as well drop it. Waste of time and money.

Mechanical and Electrical Systems in Buildings, 2nd.......2003-06-20

Very good book. Helps you understand the systems inside (and outside) of buildings in use everyday that most folks don't have a clue about. If you are interested in understanding how your building equipment functions this is a good book for you. Down to earth and well written. Recommend to property management personnel.

Great book for newbies!.......2001-05-02

If ur stepping into the building services industry, this book will be a comprehensive packaged info for your reading pleasure. Includes lotsa real-life diagrams, plan routings, concepts and explanation. It's 4am over here in Singapore and I've just finished reading one of the topics, just imagine how attractive the contents this book has! However, the only and regretable drawback is: the units are empirical which make it very difficult for me for in my country, we use SI metric units.

Residential Integrator's Certification (Residential Integration)

Average customer rating:

Residential Integrator's Certification (Residential Integration)
Delmar Learning , and Quantum Integrations
Manufacturer: Cengage Delmar Learning
ProductGroup: Book
Binding: Paperback

Do-It-Yourself | How-to & Home Improvements | Home & Garden | Subjects | Books

Household Hints | How-to & Home Improvements | Home & Garden | Subjects | Books

General | Home & Garden | Subjects | Books

Study Skills | Education | Nonfiction | Subjects | Books

Testing | Education | Reference | Subjects | Books

General | Science | Subjects | Books

General | Arts & Photography | Subjects | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Arts & Photography | Qualifying Textbooks - Fall 2007 | Stores | Books

Home & Garden | Qualifying Textbooks - Fall 2007 | Stores | Books

Nonfiction | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books

Reference | Qualifying Textbooks - Fall 2007 | Stores | Books

Science | Qualifying Textbooks - Fall 2007 | Stores | Books
Similar Items:

ASIN: 1418014095

Book Description

Residential Integrator's Certificationis a practical guide to home network design, hardware, installation, and configuration for all the major wired and wireless systems. Whether working for one of the specialized firms that install and service only one or two home technologies (cable and satellite television hookups, for example), or for a broad-based systems integrator that supplies total network solutions, the knowledge in this text, confirmed by the CompTIA HTI+ Certification or CEDIA certification, will assure multiple career opportunities in an expanding technological field.

Electricity, Electronics, and Control Systems for HVAC (3rd Edition)

Average customer rating:

Good introduction despite some errors
good
this is the book i iooking for

Electricity, Electronics, and Control Systems for HVAC (3rd Edition)
Thomas E. Kissell
Manufacturer: Prentice Hall
ProductGroup: Book
Binding: Hardcover

Buildings & Construction | Home Design | Home & Garden | Subjects | Books

Electrical | How-to & Home Improvements | Home & Garden | Subjects | Books

General | Science | Subjects | Books

Look Inside Home & Garden Books | Trip | Specialty Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Home & Garden | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books

Science | Qualifying Textbooks - Fall 2007 | Stores | Books
Similar Items:

ASIN: 0130096628

Book Description

Drawing from the author's 20+ years professional and academic experience, this book presents basic AC and DC electricity, electrical principles, electric circuits and controls for air conditioning, heating and refrigeration systems. It is specifically designed to be clear and concise enough for beginners—with a straightforward writing style and numerous diagrams and illustrations—yet comprehensive and accessible enough to serve as a professional reference. Chapter topics include safety; tols for HVAC technicians; fundamentals of electricity and electrical meters; series circuits; parallel and series-parallel circuits; magnetic theory; fundamentals of AC electricity; transformers, three-phase, and single-phase voltage; symbols and diagrams for HVAC and refrigeration systems; relays, contactors, and solenoids; single-phase open motors; single-phase hermetic compressors; three-phase open motors and three-phase hermetic compressors; motor starters and overcurrent controls; thermostats and heating controls; pressure controls, timer controls, and other controls; electronic devices for HVAC systems; electrical control of heating and air-conditioning systems; electrical control of heat pump and refrigeration systems; and direct digital control systems. For service technicians, HVAC technicians, contractors, and HVAC installers.

Customer Reviews:

Good introduction despite some errors.......1999-07-05

this is a good book for a technician or an engineer trying to get up to speed on the subject. Some typos and misprints are amusing. There are a number of disconnections between the illustrations and the text which occasionally make for difficult reading.

good.......1998-10-24

This book gives the reader the needed information for Hvac. It takes you from the basic to the practical side of hvac. It is a good book to start with.

this is the book i iooking for.......1998-09-02

from the contain ,there are every information that i needed

Mechanical and Electrical Systems in Construction and Architecture (3rd Edition)

Average customer rating:

Mechanical and Electrical Systems in Construction and Architecture (3rd Edition)
Frank R. Dagostino
Manufacturer: Prentice Hall
ProductGroup: Book
Binding: Hardcover

Electrical | How-to & Home Improvements | Home & Garden | Subjects | Books

General | Engineering | Professional & Technical | Subjects | Books

General | Science | Subjects | Books

Vocational Guidance | Job Hunting & Careers | Business & Investing | Subjects | Books

Construction | Architecture | New & Used Textbooks | Stores | Books

General | Architecture | New & Used Textbooks | Stores | Books

Electrical & Electronics | Engineering | New & Used Textbooks | Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books
ASIN: 0131814621

Books:

Books Index

Books Home

Recommended Books