The Physics of Semiconductors: An Introduction Including Devices and Nanophysics

Book Description

The Physics of Semiconductors provides material for a comprehensive upper-level-undergraduate and graduate course on the subject, guiding readers to the point where they can choose a special topic and begin supervised research. The textbook provides a balance between essential aspects of solid-state and semiconductor physics, on the one hand, and the principles of various semiconductor devices and their applications in electronic and photonic devices, on the other. It highlights many practical aspects of semiconductors such as alloys, strain, heterostructures, nanostructures, that are necessary in modern semiconductor research but typically omitted in textbooks. For the interested reader some additional advanced topics are included, such as Bragg mirrors, resonators, polarized and magnetic semiconductors are included. Also supplied are explicit formulas for many results, to support better understanding. The Physics of Semiconductors requires little or no prior knowledge of solid-state physics and evolved from a highy regarded two-semester course at the University of Leipzig.

Customer Reviews:

Nice survey of modern semiconductor science.......2006-11-11

This book is extremely well illustrated. It is a pleasure thumbing through the book and learning something in a new area just by looking at all the diagrams and pictures. However, the discussions of semiconductor devices are pretty sketchy, and formula derivations are mostly non-existent. For example, the book gives expressions for the different mobility limits for ionized impurity and phonon scattering, but does not derive any of them like Seeger would, although references are given. Unlike the Seeger classic, in its 9th edition, where new topics kind of look like they were just thrown in, this book has a more coherent integrated treatment of "new" topics with the older classical topics. If you want in-depth discussions, you will likely be disappointed. However, if you are looking for a broad survey of modern areas of interest in semiconductor physics and technology, with lots of well-chosen figures and diagrams, this is a fine book.

Introduction to CMOS OP-AMPs and Comparators

Average customer rating:

Comprehensive treatment of op-amps and comparators.

Introduction to CMOS OP-AMPs and Comparators
Roubik Gregorian
Manufacturer: Wiley-Interscience
ProductGroup: Book
Binding: Hardcover

General | Science | Subjects | Books

Applied | Physics | Science | Subjects | Books

General | Arts & Photography | Subjects | Books

Electrical & Electronics | Engineering | New & Used Textbooks | Stores | Books

All Amazon Upgrade | Amazon Upgrade | Stores | Books

Arts & Photography | Amazon Upgrade | Stores | Books

Computers & Internet | Amazon Upgrade | Stores | Books

Engineering | Amazon Upgrade | Stores | Books

Professional & Technical | Amazon Upgrade | Stores | Books

Science | Amazon Upgrade | Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Arts & Photography | Qualifying Textbooks - Fall 2007 | Stores | Books

Computers & Internet | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books

Science | Qualifying Textbooks - Fall 2007 | Stores | Books

Look Inside Art Books | Trip | Specialty Stores | Books

Look Inside Computer Books | Trip | Specialty Stores | Books

Look Inside Science Books | Trip | Specialty Stores | Books
Similar Items:

ASIN: 0471317780

Book Description

A step-by-step guide to the design and analysis of CMOS operational amplifiers and comparators

This volume is a comprehensive text that offers a detailed treatment of the analysis and design principles of two of the most important components of analog metal oxide semiconductor (MOS) circuits, namely operational amplifiers (op-amps) and comparators. The book covers the physical operation of these components, their design procedures, and applications to analog MOS circuits-particularly those involving switched-capacitor circuits, and analog-to-digital (A/D) and digital-to-analog (D/A) converters. Roubik Gregorian, a leading authority in the field, gives circuit designers the technical knowledge they need to design high-performance op-amps and comparators suitable for most analog circuit applications. In this self-contained treatment, which is loosely based on his well-received 1986 book, Analog MOS Integrated Circuits for Signal Processing (coauthored with Gabor C. Temes), Gregorian reviews the required basics before advancing to state-of-the-art topics and problem-solving techniques. This valuable guide:
* Clearly explains configuration and performance limitation issues affecting the operation of CMOS op-amps and comparators
* Details advanced design procedures to improve performance
* Provides practical design examples suitable for a broad range of analog circuit applications
* Incorporates hundreds of illustrations into the text
* Concludes each chapter with problems and references to advanced topics, useful in textbook adoptions

Introduction to CMOS Op-Amps and Comparators is invaluable for analog and mixed-signal designers, for senior and graduate students in electrical engineering, and for anyone who would like to keep up with this essential technology.

Customer Reviews:

Comprehensive treatment of op-amps and comparators........1999-05-27

This book focuses on two most important components of analog design: op-amps and comparators. A lot of new developments in recent years are covered in this book. It is very useful for any analog designers. I just feel two chapters which cover data converters could be more detailed and complete.

Quantum Mechanics: An Introduction for Device Physicists and Electrical Engineers, Second Edition

Average customer rating:

Quantum Mechanics

Quantum Mechanics: An Introduction for Device Physicists and Electrical Engineers, Second Edition
David Ferry
Manufacturer: Taylor & Francis
ProductGroup: Book
Binding: Paperback

General | Science | Subjects | Books

General | Physics | Science | Subjects | Books

Quantum Theory | Physics | Science | Subjects | Books

Look Inside Science Books | Trip | Specialty Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books

Science | Qualifying Textbooks - Fall 2007 | Stores | Books
Similar Items:

ASIN: 0750307250

Book Description

This textbook provides a complete course in quantum mechanics for students of semiconductor device physics and electrical engineering. It provides the necessary background to quantum theory for those starting work on micro- and nanoelectronic structures and is particularly useful for those going on to work with semiconductors and lasers. This book was developed from a course the author has taught for many years with a style and order of presentation of material specifically designed for this audience. It introduces the main concepts of quantum mechanics which are important in everyday solid-state physics and electronics. Each topic includes examples which have been carefully chosen to draw upon relevant experimental research. It also includes problems with solutions to test understanding of theory. For the second edition significant new material has been added to each chapter, providing updated connections with relevant experiments and device concepts. New references and new problems are included.

Customer Reviews:

Quantum Mechanics.......2000-06-10

Intended for introductory undergraduate level in quantum mechanics. Ferry did a thorough job in covering the basics including tunneling and perturbation theory. This book is fairly easy to understand, which make this a good reference good.

Introduction to Device Modeling and Circuit Simulation

Average customer rating:

Introduction to Device Modeling and Circuit Simulation
Tor A. Fjeldly , Trond Ytterdal , and Michael S. Shur
Manufacturer: Wiley-Interscience
ProductGroup: Book
Binding: Hardcover

Power Systems | Engineering | Professional & Technical | Subjects | Books

General | Science | Subjects | Books

Applied | Physics | Science | Subjects | Books

General | Arts & Photography | Subjects | Books

Electrical & Electronics | Engineering | New & Used Textbooks | Stores | Books

All Amazon Upgrade | Amazon Upgrade | Stores | Books

Arts & Photography | Amazon Upgrade | Stores | Books

Computers & Internet | Amazon Upgrade | Stores | Books

Engineering | Amazon Upgrade | Stores | Books

Professional & Technical | Amazon Upgrade | Stores | Books

Science | Amazon Upgrade | Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Arts & Photography | Qualifying Textbooks - Fall 2007 | Stores | Books

Computers & Internet | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books

Science | Qualifying Textbooks - Fall 2007 | Stores | Books
Similar Items:

ASIN: 0471157783

Book Description

This book is a useful reference for practicing electrical engineers as well as a textbook for a junior/senior or graduate level course in electrical engineering. The authors combine two subjects: device modeling and circuit simulation - by providing a large number of well-prepared examples of circuit simulations immediately following the description of many device models.

Semiconductor Devices: An Introduction (McGraw-Hill Series in Electrical & Computer Engineering)

Average customer rating:

3 stars for graduates, 2 star for undergraduate.
Overall a good book, but too heavy on the quantum physics

Semiconductor Devices: An Introduction (McGraw-Hill Series in Electrical & Computer Engineering)
Jasprit Singh
Manufacturer: McGraw-Hill Companies
ProductGroup: Book
Binding: Hardcover

General | Science | Subjects | Books

Applied | Physics | Science | Subjects | Books

Electrical & Electronics | Engineering | New & Used Textbooks | Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Computers & Internet | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books

Science | Qualifying Textbooks - Fall 2007 | Stores | Books

Look Inside Computer Books | Trip | Specialty Stores | Books
ASIN: 0070576254

Book Description

A broad, modern introduction to electronic devices, this new junior-level textbook provides an interesting and stimulating look at modern semiconductor devices. Excellent coverage of transistors, lasers and optoelectronic devices is included, with many illustrations, historical notes and worked examples, and end-of-chapter problems. The basic underlying physics is covered along with motivations for the state-of-the-art devices.

Customer Reviews:

3 stars for graduates, 2 star for undergraduate........2001-01-25

This book is too advanced for an introductory of semiconductor. The language is ok. The author seems to explains everything with minimum sentences. Sometimes, I read those signs and I don't have any idea about it. Author did not explain it. I think author should expain every sign in an equation to make sure students can understand that equation. Another problem is the mathematics in this book. Many book would give references in the end. But this book expects u know everything( mathematics and some field and waves, without giving any references. The worst part is example. Author did not explain examples completely. It is jump from one equation to another. You need a high intelligence to learn from this book. the barrier to too high for an junior student.

Overall a good book, but too heavy on the quantum physics.......1998-02-13

I have been trying to use this text for an undergraduate course in solid-state devices at the University of Texas at Tyler and have found that the material is far too advanced for juniors in electrical engineering. Singh goes into too much detail in quantum physics for the needs or interests of the typical junior electrical engineer. It would be best kept for selective use in senior-level and graduate courses in solid-state physics where it would likely be an excellent text. If you are looking for a more-introductory treatment, I would highly recommend Ben Streetman's time-honored and tested text (which I will use the next time I have to teach this course).

An Introduction to the Physics of Semiconductor Devices (Oxford Series in Electrical and Computer Engineering)

Average customer rating:

An Introduction to the Physics of Semiconductor Devices (Oxford Series in Electrical and Computer Engineering)
David J. Roulston
Manufacturer: Oxford University Press, USA
ProductGroup: Book
Binding: Hardcover

General | Science | Subjects | Books

General | Physics | Science | Subjects | Books

Applied | Physics | Science | Subjects | Books

General | Computer Science | Computers & Internet | Subjects | Books

Electrical & Electronics | Engineering | New & Used Textbooks | Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books
ASIN: 0195114779

Book Description

An Introduction to the Physics of Semiconductor Devices provides a thorough yet concise introduction to the physical operation of semiconductor devices including diodes, bipolar transistors, MOS field-effect transistors, and junction field-effect transistors, as well as an overview of numerous other devices. Ideal for second- and third-year students in electrical engineering, electronics, and physics, the text is self-contained and includes enough background physics to be accessible to students with no previous exposure to semiconductor devices. The author covers only essential topics, yet provides an in-depth, authoritative treatment of the subject. Taking a novel approach, he keeps the mathematics simple and emphasizes the basic physical operation of each device, making it easier for students to grasp the underlying physical principles. Numerous worked examples facilitate student self-study and helpful appendices contain additional material that advanced students may consult for further background. The text is accompanied by a CD-ROM featuring Student BIPOLE (with MOS Option), a user-friendly software program that allows students to study the important physical characteristics of diodes, BJTs, and MOSFETs, enabling them to step beyond the idealized world and look at real devices.

Introduction to Microlithography (Acs Professional Reference Book)

Average customer rating:

Excellent!

Introduction to Microlithography (Acs Professional Reference Book)

Manufacturer: An American Chemical Society Publication
ProductGroup: Book
Binding: Hardcover

General | Instructional & How-To | Arts & Photography | Subjects | Books

General | Photography | Arts & Photography | Subjects | Books

Quality Control | Management & Leadership | Business & Investing | Subjects | Books

Industrial & Technical | Chemistry | Science | Subjects | Books

General | Science | Subjects | Books

Applied | Physics | Science | Subjects | Books

Principles of Lithography, Second Edition (SPIE Press Monograph Vol. PM146)

ASIN: 0841228485

Book Description

Updated and expanded! Reviews the theory, materials, and processes that are used in the lithographic process. Opens with a brief historical introduction to the advances in microlithography. Discusses four major topics: the physics of the lithographic process, organic resist materials, resist processing, and plasma etching. Designed as a tutorial for researchers with no experience in the field, as well as those experienced in microlithography. Will also prove invaluable to those already involved in microlithography. Includes numerous references for more detailed reading on specific aspects of microlithography.

Customer Reviews:

Excellent!.......2000-02-14

This book is very fundamental. I'm the novice in semiconduct process. It's a excellent book to me

Introduction to Semiconductor Device Modelling

Average customer rating:

Introduction to Semiconductor Device Modelling
Christopher M. Snowden
Manufacturer: World Scientific Pub Co Inc
ProductGroup: Book
Binding: Hardcover

General | Mathematics | Science | Subjects | Books

General | Physics | Science | Subjects | Books

Applied | Physics | Science | Subjects | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books
ASIN: 9971501422

Semiconductor Optoelectronic Devices: Introduction to Physics and Simulation

Average customer rating:

Big tittle for narrow scientific field covered
Not an introductory treatment...
sladkjsa
Concise and to the point

Semiconductor Optoelectronic Devices: Introduction to Physics and Simulation
Joachim Piprek
Manufacturer: Academic Press
ProductGroup: Book
Binding: Hardcover

General | Science | Subjects | Books

General | Physics | Science | Subjects | Books

Optics | Physics | Science | Subjects | Books

General | Arts & Photography | Subjects | Books

All Amazon Upgrade | Amazon Upgrade | Stores | Books

Arts & Photography | Amazon Upgrade | Stores | Books

Computers & Internet | Amazon Upgrade | Stores | Books

Engineering | Amazon Upgrade | Stores | Books

Professional & Technical | Amazon Upgrade | Stores | Books

Science | Amazon Upgrade | Stores | Books

All Titles | Qualifying Textbooks - Fall 2007 | Stores | Books

Arts & Photography | Qualifying Textbooks - Fall 2007 | Stores | Books

Computers & Internet | Qualifying Textbooks - Fall 2007 | Stores | Books

Professional | Qualifying Textbooks - Fall 2007 | Stores | Books

Science | Qualifying Textbooks - Fall 2007 | Stores | Books
ASIN: 0125571909

Book Description

Optoelectronics has become an important part of our lives. Wherever light is used to transmit information, tiny semiconductor devices are needed to transfer electrical current into optical signals and vice versa. Examples include light emitting diodes in radios and other appliances, photodetectors in elevator doors and digital cameras, and laser diodes that transmit phone calls through glass fibers. Such optoelectronic devices take advantage of sophisticated interactions between electrons and light. Nanometer scale semiconductor structures are often at the heart of modern optoelectronic devices. Their shrinking size and increasing complexity make computer simulation an important tool to design better devices that meet ever rising perfomance requirements. The current need to apply advanced design software in optoelectronics follows the trend observed in the 1980's with simulation software for silicon devices. Today, software for technology computer-aided design (TCAD) and electronic design automation (EDA) represents a fundamental part of the silicon industry. In optoelectronics, advanced commercial device software has emerged recently and it is expected to play an increasingly important role in the near future. This book will enable students, device engineers, and researchers to more effectively use advanced design software in optoelectronics.

* Provides fundamental knowledge in semiconductor physics and in electromagnetics, while helping to understand and use advanced device simulation software
* Demonstrates the combination of measurements and simulations in order to obtain realistic results and provides data on all required material parameters
* Gives deep insight into the physics of state-of-the-art devices and helps to design and analyze of modern optoelectronic devices

Customer Reviews:

Big tittle for narrow scientific field covered.......2007-09-10

I got fooled by the big title of this book, which is confusing, inaccurate at least. It should rather be called Modern optoelectronic devices. I would expect more textbook-style contents and treatment. Unfortunately, it's more about authors selected research and experience with few modern devices, mostly lasers, and corresponding basic theory.
It treats in detail some special optoelectronic devices like lasers or modulators. No treatment of photodiodes at all, the only candidate for photodection is an amplified GaAs photodetector. I find it misleading regarding the title of this book!
Stay away from this book of you are looking for a textbook or a reference text. If you are fan of state-of-the art research, it probably for you.

Not an introductory treatment..........2007-06-09

I could sympathize with a previous reviewer because on first thumbing through this thin book, I also thought "That's it?". I almost suspect this started out as an example book for the Crosslight software. However, to be fair, on second glance, there is a lot of data in it, and the author clearly knows the subject matter. For example, if you want to model the refractive index by the Sellmeier or Adachi methods, this book supplies the basic formula as well as material data for a wide range of semiconductors to use in the formula. I found this quite useful; however, there are no derivations and if you had never used such formula before one may be a little uncomfortable just using formula blindly (although he does give references). The rest of the book is somewhat like the above. I give him credit for at least talking about near and far field emission patterns a little bit. It is an easy book to browse through, get ideas from, and use as a reference, but I do not think it is a good "textbook" to learn the material from as a first exposure

sladkjsa.......2005-02-11

This book was required for my Optoelectronic devices class...sort of. There are no problems in the book and there are no examples. I looked through the book and read some of it and then decided to return it because I really don't think it's worth $90. The book is only 280 pages, and if you look through the table of contents you notice that half of those pages are review of things like quantum mechanics basics, density of states in semiconductors, and other semiconductor basics. In the first few pages of the book he describes conduction band electrons and holes, and refers to holes as actual charges, making no reference at all to the fact that they are just empty bonds. That alone is not much to go on to judge a book, but I was immediately turned off by this. If you're learning these review things for the first time, you don't want to learn them from a 5 page handwaving review. And if you already know these basics, you don't want half the book to be about them, leaving only about 130 pages for actual new Optoelectronic Devices material. I am in the class now at Virginia Tech, but I refuse to buy this book. I'm looking for another book on the topic.

Concise and to the point.......2003-02-12

Including over 180 table and figures, the book is practical and it is easy to use both for studying and handbook. Almost on every page, or every other page, there¡¯s a table or a figure, companied by coherent descriptions, so one can easily understand what is going on. The tables seem to be a compilation of material parameters and constants, useful and convenient for any optoelectronic device modeling, some of which are hard to find on other books. Many simulation results are given along with real device measurements from latest device research projects. If you're using or going to use high-end software for optoelectronic device design and analysis, this is the book for you.

Books:

Books Index

Books Home

Recommended Books